M02-2.5型电脑数控弹簧端面磨床
TYPE M02-9B DOUBLE FEED TRAY CNC SPRING END GRINDING MACHINE

一、电脑数控上磨头自动进给、复位，进给速度、进给量和磨削压力可自动补偿，也可手动。
二、料盘转速采用变频调速。
三、下磨头采用手动补偿砂轮的磨损.

1.The upper grinding head is controlled by computer, realizing following pro`perties, such as, automatic replacing, automatic feeding speed adjustment, automatic feeding quantity adjustment, and automatic- compensatoin of grinding pressure, as well as manual operation for grinding pressure.
2.The rotational speed of the feed tray could be adjusted by frequency-control gear device.
3.The lower grinding head adopts manual-compensation for the wearing of emery wheel.
　　主要技术参数(Main Technique Parameter)
 型号(Style)
M02-2.5
　可磨弹簧钢丝直径(mm)steel wire diameter of grinding spring 　θ0.5~θ2.5
　可磨弹簧直径(mm) diameter of grinding spring 　Φ5-Φ30
　可磨弹簧高度(mm)height of gfinding spring 　8-60
　砂轮尺寸(外*高)grinding wheelsize(outside*height) 　Φ250*50
　磨头转速n/min grinding head speed 　1430
　主机外形尺寸(长*宽*高)(length*width*height)machinesize 　650*700*1800
　主机净重(kg)net weight of the machine 　550
　电源power 　three phase 380V.AC.50HZ
　马达总功率(电机5台)motor power(motor 5 pcs) 　4.75